BALANCE-CUT BAC ADVANCED BORING ARBOR for LARGE DIA. JAPAN PAT.
For Finishing
ZMAC-V Unit
L
Insert 6MP
ZMAC -V Cartridge
BAC -V
42
RPD Plate
High Pressure Coolant Through Tool
RAK Arbor
P.109
MCD-130B (Balancer)
Boring Dia: φ 130 ～ 595mm / Over Turning Dia. : 10 ～ 430mm
Outer diameter grinding (CCW)
Cartridge (Balancer)
D 1 MIN. ～ MAX.
D
Weight (kg)
RPD-130AA -180AA RPD Plate No.
RAK Arbor Code No. ＊ 1
L
C
Code.No
TAPE
MIN. ～ MAX.
130 ～ 180 180 ～ 230
10 ～ 30 30 ～ 80
BT40-BAC130-225AAV -BAC180-225AAV BT50-BAC130-205AAV (IT40)
7.5 8.0 9.8
No. 40
BT40-RAK-130A
61
225
BT50-RAK-110A -160A -210A
205 255 305 355 405 455 505 205 255 305 355 405 455 505 205 255 305 355 405 455 505 205 255 305 355 405 455 505
(IT50)
-305AAV -355AAV -255AAV
12.5 15.2 17.9 20.6 23.3 26.0 10.3 13.0 15.7 18.4 21.1 23.8 26.5 10.9 13.6 16.3 19.0 21.7 24.4 27.2 11.4 14.1 16.8 19.5 22.2 24.9 27.6 16.7 17.2 17.7 18.2 18.7
130 ～ 180
10 ～ 30
-260A -310A -360A -410A
RPD-130AA
-405AAV -455AAV -505AAV -BAC180-205AAV
-RAK-110A -160A -210A
-255AAV -405AAV -305AAV -355AAV
180 ～ 230
30 ～ 80
-260A -310A -360A -410A
RPD-180AA
-455AAV -505AAV -BAC230-205AAV -255AAV
90
MCDZ-130AAV (MCD-130B) Insert 6MP
-RAK-110A -160A -210A
No. 50
-305AAV -355AAV -455AAV -405AAV
230 ～ 280
80 ～ 130
-260A -310A -360A -410A
RPD-230AA
-505AAV -BAC280-205AAV
-RAK-110A -160A -210A
-405AAV -505AAV -455AAV -255AAV -305AAV -355AAV
280 ～ 330
130 ～ 180
-260A -310A -360A -410A
RPD-280AA
＊ ＊ ＊ ＊ ＊
330 ～ 380 380 ～ 430 430 ～ 480 480 ～ 530 530 ～ 580
180 ～ 230 230 ～ 280 280 ～ 330 330 ～ 380 380 ～ 430
RPD-330AA -380AA -430AA -480AA -530AA
-BAC530-220AAV -BAC330-220AAV -BAC380-220AAV -BAC430-220AAV -BAC480-220AAV
BT50-RAK330-125 I T50-RAK330-135
220 (230 ＊ )
98
★ “C” grade (Coated) Inserts are supplied as standard.
P.109 Please refer
P.106 for cutting condition. P.86 for Arbor ( RAK ) and
θ (0 °～ 180 ° )
★ Unit “M10HZ-75V” is provided as semi-standard, please refer “M10HZ-85V”
Drive Key
Plate ( RPD ) . ★ Arbor, Plate and Cartridge are delivered in separate packages. ★ When ordering, please let us know machine maker and model no. to avoid the interfererce with tool magazine of ATC . ★ The location of cutting edge is same as drive key in standard. The different location is available, please specify θ in Code No. e.g. BT50-BAC180-255AAV (90 ° ) ★ The boring arbors marked ＊ with IT50 , L (gauge length) is 230. e.g. IT50-BAC330-230AAV ★ Special sleeves (2 pieces) are required to change the arbor to support center coolant. Code No. RAK-CLS (sold separately) ★ When using it for outer diameter cutting , the spindle will rotate in reverse.
Cutting Edge
View from Cutting edge.
85
Powered by FlippingBook