Insert 6MP BALANCE-CUT BAC ADVANCED BORING ARBOR for LARGE DIA. JAPAN PAT. L
For Finishing
ZMAC-V Unit
P.81
φ D
ZMAC-V Cartridge
P.81
φ C
RPC Plate
BAC-V
P.70
RAK Arbor
P.70
P.109
Boring Dia: φ 130 ～ 595mm
MCC-130B (Balancer)
P.81
D
Weight (kg)
RAK Arbor Code No.
Cartridge (Balancer)
PPC Plante No
L
C
Code.No
TAPER
MIN. ～ MAX. 130 ～ 195
BT40-BAC130-205V -BAC180-205V BT50-BAC130-185V (IT40)
RPC-130 -180
No. 40
7.0 8.0
BT40-RAK-130A
61
205 185 235 285 335 385 435 185 235 285 485 335 385 185 235 285 485 435 335 385 185 235 285 485 435 335 385 435 485
180 ～ 245
BT50-RAK-110A -160A -210A
10.0 12.7 15.4 18.1 20.8 23.5 26.2 10.6 13.3 16.0 18.7 21.4 24.1 26.8 11.3 14.0 16.7 19.4 22.1 24.8 27.5 11.9 14.6 17.3 20.0 22.7 25.4 28.1 16.7 17.0 18.0 19.0 20.0
-285V -235V -335V -385V -435V -485V
(IT50)
130 ～ 195
RPC-130
-260A -310A -360A -410A
-BAC180-185V
-RAK-110A -160A -210A
-285V -235V -335V -385V -435V -485V
180 ～ 245
-260A -310A -360A -410A
RPC-180
90
MCCZ-130V (MCC-130B) Insert 6MP
-BAC230-185V -285V -235V
-RAK-110A -160A -210A
No. 50
230 ～ 295
-260A -310A -360A -410A
-335V -385V -435V -485V
RPC-230
-BAC280-185V
-RAK-110A -160A -210A
-285V -235V -335V -385V -435V -485V
280 ～ 345
RPC-280
-260A -310A -360A -410A
＊ ＊ ＊ ＊ ＊
330 ～ 395 380 ～ 445 430 ～ 495 480 ～ 545 530 ～ 595
-BAC330-210V -BAC380-210V -BAC430-210V -BAC480-210V -BAC530-210V
RPC-330 -380 -430 -480 -530
BT50-RAK330-125 I T50-RAK330-135
210 (220 ＊ )
98
★ “C” grade (Coated) Inserts are supplied as standard. ★ Unit “M5HZ-55V” is provided as standard, please refer
P.109 Please refer
P.107 for cutting condition.
θ (0 °～ 180 ° )
P.70 for Arbor ( RAK ) and Plate ( RPC ) .
Drive Key
★ Arbor, Plate and Cartridge are delivered in separate packages. ★ When ordering, please let us know machine maker and model no. to avoid the interfererce with tool magazine of ATC . ★ The location of cutting edge is same as drive key in standard. The different location is available, please specify θ in Code No. e.g. BT50-BAC180-235V (90 ° ) ★ The boring arbors marked ＊ with IT50 , L (gauge length) is 220. e.g. IT50-BAC330-220V ★ For centre through coolant type, please add “-C” at the end of Code No. e.g. BT50-BAC130-185V-C
Cutting Edge
View from Cutting edge.
High Pressure Coolant Through Tool
79
Powered by FlippingBook