MAJOR DREAM HOLDER
MAJOR DREAM HOLDER
Holder with an adjust screw for axial adjustment is supplied as an option. Please contact us.
Dampening Effect
H ＊
G No. (Option)
TiN Bearing Effect
H 1
φC 1
φDφC
L 1
L 2
L
MDSK
H : MAX. Cutter Shank Length to be inserted
tool can be used on the M/C with BT standard spindle.
JAPAN PAT.
＊
Weight (kg)
116 131 116 131 146 176 206 116 131 146 176 206 116 131 146 176 206 159 175 205 235 159 175 205 235 H
C
105 120 105 120 135 165 195 105 120 135 165 195 105 120 135 165 195 105 135 165 195 105 135 165 195 L
24.0 26.1 31.7 33.8 35.9 40.4 44.8 36.7 38.8 40.9 45.4 50.1 43.5 45.8 48.0 52.6 52.8 51.4 55.6 59.8 64.0 57.2 61.6 66.0 70.2 C 1
L 2
D
TAPER
Code No. NBT50-MDSK 6-105 -120 -MDSK10-105
L 1
H1
G No. (Option)
Collet
48.0 63.0 48.0 63.2 78.2
3.6 3.7 4.3 4.4 4.7 5.0 5.3 4.2 4.7 5.0 5.3 5.6 4.1 4.9 5.2 5.5 5.8 4.9 5.3 5.9 6.7 4.9 5.7 6.5 7.5
3.0 ～ 6.0
21 ～ 35
SK 6 A
19.5
16.2
SKG- 8
-120 -135 -165 -195 -MDSK13-105 -120 -135 -165 -195 -MDSK16-105 -120 -135 -165 -195 -MDSK20-105 -135 -165 -195 -MDSK25-105
SKG-12L
3.0 ～ 10.0
30 ～ 50
SK10 A
27.5
18.2
110.2 141.2
48.0 63.0 78.0
SKG-15
3.0 ～ 13.0
31 ～ 60
SK13 A
33.0
22.0
110.0 144.0
No.50
48.0 64.0 80.1
SKG-18L
3.0 ～ 16.0
45 ～ 70
SK16 A
40.0
23.0
114.7 144.6
42.3 72.0
SKG-22
4.0 ～ 20.0
47 ～ 80
SK20 A
48.0
25.2
102.0 132.0
42.3 74.0
-135 -165 -195
SKG-28
55 ～ 85
8.0 ～ 25.4
SK25 A
55.0
27.0
105.0 135.0
★ Please refer
P.285 for the Jet coolant system, J type nut and cap.
NBT40 MDSK10 90 Explanation of the Code No.
★ GH handle is available as an option.
P.299 Please order with the Code No. GH6 : MDSK6 &, GH10 : MDSK10,
GH12 : MDSK13, GH16 : MDSK16, GH20 : MDSK20, GH25 : MDSK25 ★ Please add “P” at the end of Code No. for high speed specification, e.g NBT40-MDSK10-60P ★ Holder with an adjust screw for axial adjustment is supplied as an option. Please contact us.
Nominal Gauge Length
Chucking Capacity
GH Handle
MAJOR DREAM HOLDER
Please use A type SK collet for the end milling operation.
P.283
Shank No.
42
Powered by FlippingBook