OIL JETTER SLIM CHUCK for NC LATHE
■ Oil Jetter SLIM CHUCK
STH-SK
50 60 50 30 45 ℓ
ℓ 1
G （ Option ）
SK Collet
STH16-SK10-120 STH20-SK16-130 STH25-SK16-130 STH32-SK16-120 STH40-SK16-120 STH50-SK16-120 Code No.
D
16 20 25 32 40 50 d
C
SK 10
1.75 ～ 10
27.5
-
70
SK 16
2.75 ～ 16
40
SKG-18A
90 75
φ C
SK Collet
★ Please refer
P.283 for SK Collet.
φ d
φ C
ℓ
ℓ 1
φ D
L
■ Adjust type Centering Holder & Centering Dial Gauge
LCH-SK
●Adjust any radial direction 0.5mm. ●Adjust misalignment within ±0.01mm between a chuck and a turret head. ●Stable drilling and perfect finishing. ●Improve tool life and promote high precision and unmanned operation. ●Especially, it is essential for carbide and small diameter center drill.
LCD Dial Gauge
LCD Holder Work Piece
The angle of the flat surface of the shank and the adjusting screw is 45 ° as standard. For different angles, please contact us separately.
SK Collet
LCH16-SK10 LCH20-SK16 LCH25-SK16 LCH32-SK16 LCH40-SK16 LCH50-SK16 Code No.
D
16 20 25 32 40 50 d
L
C
SK 10
1.75 ～ 10
46
27.5
Adjustment Screw 70
L
SK 16
2.75 ～ 16
58
40
φ D
φ C
φ d
★ Please refer
P.283 for SK Collet.
SK Collet
Lock Screw
● 6" to 12" chuck is available. ● It is possible to put on lathe chuck jaws and measure directly runout turret head. ● Double Sided Dial Gauge with excellent visibility is attached.
（ Magnet mounted ） Easy centering
Indicator Fixing Knob
Slight Adjusting Knob
Double Sided Dial Gauge
6 "and 12" soft jaw width only
42
45
LCD
165
Magnet
OIL JETTER DRILL SLEEVE for NC LATHE
● With 4 coolant discharge nozzles along the drill groove. ● Since the nozzle position is variable, it exhibits the coolant effect. ● An expensive oil hole drill is unnecessary and continuous operation is possible.
〈 For MT Shank Drill 〉 〈 For Straight Shank Drill 〉
ℓ ℓ 1
ℓ ℓ 1
LE25-MT1 -MT2 LE32-MT1 -MT2 -MT3 LE40-MT1 -MT2 -MT3 -MT4 LE50-MT1 Code No.
LS16-10 LS20-10 -12 LS25-10 -12 -16 LS32-10 -12 -16 -20 LS40-10 -12 -16 -20 -25 -32 LS50-10 Code No.
C
C
G
Ring
MT
47 47
25 25 15 25 15 30
44.5 57 44.5 59 65 41.5
60 60
M8 M8 M6 M8 M6 M8 M10
47 47 56 56 83 66 83
15 15 25 18 25 48 18 20 38
φd
φC
1
47
60
LE-MT
56 65 75 70 75
Ring
G
47 56
70
φd
φC
φD
-MT2 -MT3 -MT4
M6 M8
1
18
LS
56
70
M10 M12
30 35
10 12 16 20 25 32 φ D
MT1 MT2 MT3 MT4 MT No.
φ 8.1 ～ φ 14 φ 14.1 ～ φ 23 φ 23.1 ～ φ 32 φ 32.1 ～ φ 44 Drill diameter
Drill diameter
66
φ 8.1 ～ φ 10 φ 10.1 ～ φ 13 φ 13.1 ～ φ 14.5 φ 14.6 ～ φ 18.5 φ 18.6 ～ φ 23.5 φ 23.6 ～ φ 32
M6 M8
-12 -16 -20 -25 -32
18
66
75
M10 M12
20 35
314
Powered by FlippingBook