NIKKEN REAMER SERIES CATALOGUE
■ CARBIDE, HSS / With / Without MILLING BLADE / from SMALL DIA. to LARGE DIA. ■ REAMER SERIES CATALOGUE CAT No.166F to cover all kinds of Reamers (Carbide / HSS, Without / With End Tooth, Diameter from φ2mm to φ100mm) ■ CARBIDE PF RADICAL MILL REAMER EVO Specially designed for the tough material such as Inconel, Hastelly, Waspaloy and Titanium Smooth cutting capability and special coating to protect the base material from cutting heat and deposition. Due to the high hardness level ( 6000HV ) has been achived using Hydrogen-Free DLC coating, the hardness of the SPX reamer is close to the hardness of the diamond. ■ Two types of OH reamer, through hole and blind hole, are line-up. ■ CARBIDE PF SPECTRUM REAMER SPX The newest reamer for Aluminium and Nonferrous Metals
166FⒺ NIKKEN KOSAKUSHO WORKS, LTD.
Through Hole
Blind Hole
OH shape of reamer with OH
Please refer to REAMER SERIES Catalogue.
NIKKEN REAMER SERIES / WITH MILLING BLADE
■ CHARACTERISTICS of REAMER With MILLING BLADE
● Hole accuracy is not required for inspection (finished hole tolerance within H7) ● Outstanding surface roughness and durability (surface roughness within 3S)
■ Plane roughness data of NCS-16.0
L = 1.6mm P-curve
X20000
X50
Material : S45C Cutting speed : 14.5m / min Feed rate : 0.35mm/rev. Drilled hole : φ 15.5 （ φ 0.5 stock removal ）
Burnishing
NC sensor reamer moves forward guiding the pilot hole machined by milling blade. Pilot part
Semi-finish (Optimal finishing removal) is achived by milling blade from dnilled hole variation. Milling blade (Semi-Finish)
Smooth finish is achieved by reamer blade for the optimal finishing removal from milling blade. Reamer blade (finishing)
This is a polishing section without a cutting edge to clean up the roughness of the finished surface.
Swarf by milling blade Swarf by reaming blade
305
Powered by FlippingBook