NIKKEN DIAMOND SURFACE
All cutting edges of diamonds electrodeposited by a special manufacturing method are aligned, and it provides a smooth feel and uniform polishing.
■ The use of high quality diamonds provides excellent sharpness and durability. ■ Uniformly arranged diamond abrasive grains in a dotted pattern. ■ Can be used freely from all directions for workpiece. ■ The special stand made of urethane foam with excellent workability.
Special stand made of urethane foam with excellent workability
Best of Whetstone Restoration Surface restoration of the whetstone is completed in 60 seconds.
The Secret of DIAMOND SURFACE Dots made of diamond abrasive grains are evenly arranged. The aggregation becomes a sharp cutting edge.
Dimensions
Specifications
Grain Size #160 #400 #600
Surface Roughness Coarse Second-cut Smooth
Urethane Foam Stand Aluminum Plate Diamond
Code No. NKDS-160 NKDS-400 NKDS-600
ECO BLACK TOOLING
Rust Proof Treatment (Option) The RP treatment creates a fine film of the contents (Fe3O4) and (Fe2O3) , and penetrates into the tool holder material 1 ～ 2 micron deep. This fine film inhibits the rust and corrosion of your tool holder taper and stops it from being transmitted to your machine spindle. The RP treatment will not effect the accuracy and the hardness of your NIKKEN tool holders.
Standard 8 years used
RPT 18 years used
Caution
RP treatment
・ If the detection of tool existing at tool magazine by optical method on your M/C, the tool with RP treatment may be judged "no tool existing". Please check your M/C specification. ・ The taper connection of the tool shank with RP treatment is more stuck than the taper connection of the tool shank without RP treatment. Then, the unclamping force for the tool with RPT is required 20% stronger than the unclamping force for the tool without RPT. Please be careful to check the unclamping force of your M/C, when the tool with RPT treatment is chosen. ・ Therefore, the taper cone of tool and NC5 tool is changed to without RP treatment as standard. And the special anti-rust treatment is applied to the taper cone of the tool and NC5 tool.
302
Powered by FlippingBook