WITH OIL HOLE DRILL J-TYPE Nut with standard Collet and J-CAP(C) SLIM CHUCK COOLANT SOLUTION
2
J-CAP (C)
+
SK J-TYPE Nut (for standard Spanner)
OH DRILL
Coolant will be supplied from the oil hole of the drill due to sealing by O-ring around drill shank. + Prevention of swarf Contamination
SK J-TYPE Nut (for GH Handle)
In the case of with J-Nut, please add “ -J ” to the end Code No. As Nut full length becomes longer 6mm than a standard nut, in the case of J-Nut, please be careful. ・ When using SK-A collets or AC collets, or when gripping a cutting tool smaller than the normal diameter on SK collets, the total length will be shortened by about 3mm. Please be careful when you check the interference.
OPTION
Collet Selection
Style
J-TYPE Nut
J-CAP(C) Code No. for OIL HOLL DRILL
ADJUST SCREW
Wrench for J-cap Code No.
Spanner
SK, SK-P
SKT, MDSK
(standard Spanner)
(for standard Spanner)
(for standard Spanner)
SK 6 SK 6 ( P ) (High Speed) MDSK 6 SKT 6 SK10 SK10 ( P ) (High Speed) MDSK10 SKT10 SK13 SK13 ( P ) (High Speed) MDSK13 SKT13 SK16 SK16 ( P ) (High Speed) MDSK16 SKT16 SK20 SK20 ( P ) (High Speed) MDSK20 SKT20 SK25 SK25 ( P ) (High Speed) MDSK25 SKT25
SKTN-6KJ
SKN-6WKJ
(GH Handle) SKL-6W
SK 6- ○ . ○ SK 6- ○ . ○ A
(for GH Handle)
(for GH Handle)
SKJ 6-3C, 3.3C,
SKJL-6
4C, 4.2C, 5C, 6C
MDSKN-6KJ
SKN-6WKJ (GH)
GH6
(standard Spanner)
(for standard Spanner)
(for standard Spanner)
SKTN-10KJ
SKN-10KJ
SK10- ○ . ○ SK10- ○ . ○ A
(GH Handle) SKL-10
SKJ10-3C, 4C, 5C, 5.5C, 6C, 6.2C, 6.8C, 7C, 8C, 8.5C, 10C
(for GH Handle)
(for GH Handle)
SKJL-10
MDSKN-10KJ
SKN-10KJ (GH)
GH10
(C-Spanner)
(C-Spanner)
(C-Spanner)
SKN-13BJ
SKTN-13BJ
SK13- ○ . ○ SK13- ○ . ○ A
(GH Handle) 9HC12A
Please refer P.56
(for GH Handle)
(for GH Handle)
SKJ16-7C, 8C, 8.5C, 10C, 10.3C, 12C, 12.5C
SKN-13BJ (GH)
MDSKN-13BJ
GH12
Fig3, Fig4, Fig5
(C-Spanner)
(C-Spanner)
(C-Spanner)
SKJL-16
SKN-16BJ
SKTN-16BJ
(GH Handle) 9HC16
SK16- ○ . ○ SK16- ○ . ○ A
SKJ16-7C, 8C, 8.5C, 10C, 10.3C, 12C, 12.5C, 14C, 15C, 16C
(for GH Handle)
(for GH Handle)
SKN-16BJ (GH)
MDSKN-16BJ
GH16
(C-Spanner)
(C-Spanner)
(C-Spanner)
SKN-20BJ
SKTN-20BJ
SK20- ○ . ○ SK20- ○ . ○ A
(GH Handle) 9HC22
(for GH Handle)
(for GH Handle)
SKJ25-8C, 10C, 12C, 16C 17.5C, 20C
SKN-20BJ (GH)
MDSKN-20BJ
GH20
(C-Spanner)
(C-Spanner)
(C-Spanner)
SKJL-25
SKN-25BJ
SKTN-25BJ
SK25- ○ . ○ SK25- ○ . ○ A
(GH Handle) 9HC22
(for GH Handle)
(for GH Handle)
SKJ25-8C, 10C, 12C, 16C 17.5C, 20C, 25C
SKN-25BJ (GH)
MDSKN-25BJ
GH25
＊ We recommend A type Collet in MDSK. ★ The nut Code No. for SK6 and SK10 are changed. The old Code No. are
SKN-6WKJ : SKN-6WBJ, SKN-6WKJ （ GH ） : SKN-6WBJ （ GH ） , SKN-10KJ : SKN-10BJ, SKN-10KJ （ GH ） : SKN-10BJ （ GH ） , SKTN-6KJ : SKTN-6BJ, MDSKN-6KJ : MDSKN-6BJ, SKTN-10KJ : SKN-10BJ, MDSKN-10KJ : SKN-10BJ （ GH ） We are replaced by a new model product as soon as the product stock of the old model No. disappears.
286
Powered by FlippingBook