MILLING CHUCK COOLANT SOLUTION
CUTTING TOOL WITH OIL HOLE
JETCOOLANT SYSTEM
Direct Chucking with Collet
Direct Chucking with Collet
Front Nut with O-ring for direct chucking
Front Nut for Direct Chucking for JETCOOLANT
CKFN-DC
Front Nut for JETCOOLANT
Front Nut with O-ring
CKFN-D （ with JETCOOLANT Groove ）
Standard Milling Chuck ex. ） BT ○○ -C ○○
CCNK Collet
CCK Collet
CCNK Collet
CCK Collet
CKFN-MN （ with Coolant Nozzle ）
CKFN （ with V Groove ）
CKFN-C
② Inserting depth is longer than ℓ 1 . ① In case of cutting tool shank is shorter than ℓ 1 . Please use stopper. P.34
Front Nut for Direct Chucking for JETCOOLANT ＊ Inserting depth should be less than ℓ 1 .
ex. ） BT ○○ -C ○○ C MBT ○○ -C ○○ NBT ○○ -C ○○ NC5 ○○ -C ○○ HSK ○○ -C ○○ Milling chuck for high pressure center through
CKFN-D （ with JETCOOLANT Groove ）
① ②
ℓ 1
ℓ 1
① In case cutter dia is larger than its shank dia. ② Front Nut for JETCOOLANT
① ②
ℓ 1
The Jet Coolant Pressure creates a tornado effect, ensuring efficient swarf dispersal. ■ CENTRE COOLANT STRAIGHT COLLET ＋ FRONT NUT ＊ Direct chucking means, for example, to use shank dia.32 cutting tool to Milling Chuck with inner dia.32. ＊ Milling Chuck for high pressure center through can be used for high pressure due to inside perfect seal.
For cutters with cutting diameter which is larger than the shank diameter. ＋ CKFN-MN
A front nut with an O-ring seal, for use with oil hole cutter, is also available as option. ＋ CKFN-C
CCK
Prevention of the swarf contamination.
For groove cutting ＋ CKFN
279
Powered by FlippingBook