Straight Shank MILLING CHUCK
L
For Extension
S-C for Multi-Lock Milling Chuck
L 1
φ d
φ d 1
φ D
Photo. shows S32-C12-200
MAX. L 1
φ d
φ D
33 44 52 44 52 φ d 1
L
Code No.
Weight(kg)
Style
Collet
S32-C12-120, 160, 200 -C16-130 -C20-150 S42-C16-180 -C20-185
12 16 20 16 20
60, 100, 140 70 90
0.6, 0.9, 1.1 0.7 1.1 1.6 1.7
120, 160, 200 130 150 180 185
KM 12 KM 16 KM 20 KM 16 KM 20
32
32
120 125
42 42 ★ S32-C22-150, S42-C22-185, S42-C25-150 are also available as semi-standard. ★ The MC and NC straight shank Milling Chuck is unified to the above Code No. ★ Please refer
P.280 for KM Collet. ★ Spanner is available as an option. C20 : 9HC22, C25 : 9HC25 C32 : 9HC32, C42 : 9HC42 C12 (di= φ 30) : 9HC12, C12 (di= φ 33) : 9HC12A, C16 : 9HC16, C20 : 9HC22
Straight Shank MINI-MINI CHUCK
L
Collet
L 1
L 2
φ d
K-MMC
φ D
φ D1
φ D 1
Style 16 20 32
Collet
0.1, 0.2 0.2 0.5, 0.7 1.0 Weight(kg)
Code No.
L
L 1 50, 130
L 2
Chucking Range D 1 ～ 4 2 ～ 8 2 ～ 8 4 ～ 12
K16-MMP 4- 70, 150 K20-MMC 8-100 K32-MMC 8-122, 160 K32-MMC12-170S
20 20 40 50
15 20 20 30
70, 150 100 122, 160 170
PMK 8 VMK 8 PMK 8 VMK 8 MPK 4 PMK12 VMK12
80 67 120
★ Wrench is supplied as standard. Collet is available as an option.
Straight Shank TAPPER CHUCK
L
For Slim body and Ultra Smooth Tapping Operations with Float Mechanism.
φ d 1
φ d
d 2
NZ
φ D
ZKG
Floating
Tap Collet
– Compression Tension +
Tapping Capability
Float Compression Tension
Weight (kg)
L
d 1
d
d 2
Code. No.
Tap Collet
Style
M P
M 2 ～ 12 M 3 ～ 16 M 8 ～ 24 M 2 ～ 12 M 3 ～ 16 M 8 ～ 24
P1/16 ～ 1/4 P1/8 ～ 3/8 P1/4 ～ 5/8 P1/16 ～ 1/4 P1/8 ～ 3/8 P1/4 ～ 5/8
105 ～ 125 125 ～ 145 140 ～ 160 90 ～ 125 125 ～ 160 140 ～ 175
NZ32-12-105 -16-125 -24-140 NZ42-12- 90
19 25 30 19 25 30
45 55 63 45 55 63
5 8
15 20
1.3 2.2 2.8 2.0 3.0 3.6
ZKG 12 ZKG 16 ZKG 24 ZKG 12 ZKG 16 ZKG 24
32
32
5
15
42
42
-16-125 -24-140
8
20
STRAIGHT SHANK MASAMUNE SHRINK FIT HOLDER
3 ﾟ
φ D
L 2
Fig.1
φ D 1
L 1
L
L 3
L 2
L 2
3 ﾟ
3 ﾟ
φ D
φ D
Fig.2
Fig.3
φ D 1
φ D 1
MS-A
L 1
L 1
L
L
φ D 3 4 4 6 8 6 8
L 1 27 42 38 72 57 38
L 2 10 13 13 19 25 19 25 31 37
L 3̶̶̶
D 1 6 7 7
D 2
Fig 1 1 2 1 3
Code No. MS10-A 3- 90 -A 4- 90 MS16-A 4-120 -A 6-120 -A 8-120 MS20-A 6-150
L 90
Style d 10
8.7 9.7
11.2 14.2 16.0 17.4 19.4 20.0 20.0
16
120
10 12 10 12 14 16
-A 8-150 -A10-150 -A12-150
20
150
10 12
63 78
★ Please note the acceptable shank tolerance is h 6 . ★ Carbide tool can be used and HSS tool can not be used.
★ The tool will become very hot during heat shrinking. Please use glove for safety.
★ ID= φ 16, φ 20 and φ 25mm are available.
★ Inductive style of the heat shrinking unit is recommended.
276
★ Minimum insertion length is L 2 . ★ The capacity of the drier is approx. 3kW. ★ Maximum insertion length is L 3. If cutting tool is inserted longer than L 3 , the cutting tool bottom will be contacted to holder. Then, the run-out accuracy will be worse.
Powered by FlippingBook