ZMAC-V Unit BALANCE-CUT BORING ARBOR for LARGE DIA. ULTRA-LIGHT WEGHT PAT.
For Finishing BAC ADVANCED BORING ARBOR
L
Insert 6MP
ZMAC -V Cartridge
BAC -V
RPD Plate
42
RAK-CN Arbor
High Pressure Coolant Through Tool
Outer Cutting （ CCW ）
MCD-130B (Balancer)
P.109
Boring Dia. ： φ 130 ～ 580mm / Outer Cutting Dia. ： φ 10 ～ 430mm
JAPAN PAT.
Cartridge （ Balancer ）
D 1 MIN. ～ MAX.
D
Weight （ kg ）
RPD-130AA -180AA RPD Plate No.
RAK-CN Arbor Code No. ＊ 1
L
C
Code.No
TAPE
MIN. ～ MAX.
130 ～ 180 180 ～ 230
10 ～ 30 30 ～ 80
HSK 63A-BAC130-225AAV -BAC180-225AAV HSK100A-BAC130-205AAV
6.9 7.4 9.3
HSK63A
HSK 63A-RAK-130A
61
225 205 255 305 355 405 455 505 205 255 305 355 405 455 505 205 255 305 355 405 455 505 205 255 305 355 405 455 505
HSK100A-RAK-110A -160A -210A
-305AAV -355AAV -255AAV
11.8 14.5 17.2 19.9 22.6 25.3 9.8 12.3 15.0 17.7 20.4 23.1 25.8 10.4 12.9 15.6 18.3 21.0 23.7 26.5 10.9 13.4 16.1 18.8 21.5 24.2 26.9 16.0 16.5 17.0 17.5 18.0
130 ～ 180
10 ～ 30
RPD-130AA
-260A -310A -360A -410A
-405AAV -455AAV -505AAV -BAC180-205AAV
-RAK-110A -160A -210A
-255AAV -405AAV -305AAV -355AAV
180 ～ 230
30 ～ 80
RPD-180AA
-260A -310A -360A -410A
-455AAV -505AAV -BAC230-205AAV -255AAV
MCDZ-130AAV (MCD-130B) Insert 6MP
90
-RAK-110A -160A -210A
HSK100A
-305AAV -355AAV -455AAV -405AAV
230 ～ 280
80 ～ 130
-260A -310A -360A -410A
RPD-230AA
-505AAV -BAC280-205AAV
-RAK-110A -160A -210A
-405AAV -505AAV -455AAV -255AAV -305AAV -355AAV
280 ～ 330
130 ～ 180
RPD-280AA
-260A -310A -360A -410A
330 ～ 380 380 ～ 430 430 ～ 480 480 ～ 530 530 ～ 580
180 ～ 230 230 ～ 280 280 ～ 330 330 ～ 380 380 ～ 430
RPD-330AA -380AA -430AA -480AA -530AA
-BAC530-220AAV -BAC330-220AAV -BAC380-220AAV -BAC430-220AAV -BAC480-220AAV
HSK100A-RAK330-125
98
220
★ “C” grade (Coated) Inserts are supplied as standard. P.107 for cutting condition. ★ Unit “M10HZ-75V” is provided as semi-standard, please refer “M10HZ-85V” Please refer
P.109
θ ( 0 °～ 180 ° )
Drive Key
P.86 for Arbor ( RAK ) and Plate ( RPD ). ★ Arbor, Plate and Cartridge are delivered in separate packages. ★ When ordering, please let us know machine maker and model no. to avoid the interfererce with tool magazine of ATC . ★ The location of cutting edge is same as drive key in standard. The different location is available, please specify θ in Code No. e.g. HSK100A-BAC180-255AAV (90 ° ) ★ Lubrication Pipe is optional. Please refer P.298 ★ When using it for outer diameter cutting , the spindle will rotate in reverse.
Cutting Edge
View from Cutting Edge
266
Powered by FlippingBook