BALANCE-CUT BORING ARBOR for LARGE DIA. ULTRA-LIGHT WEGHT
■ With the screws for slight adjustment ■ Boring Dia : φ 130 ～ φ 580mm
RAC BORING ARBOR
For Roughing
Cartridge Head
RCD Cartridge
L
42
RAC
High Pressure Coolant Through Tool
RAK-CN Arbor
RPD Plate
Outer Cutting （ CCW ）
P.62
Boring Dia. ： φ 130 ～ 580mm / Outer Cutting Dia. ： φ 10 ～ 430mm
D 1 MIN. ～ MAX.
D
RPD-130AA -180AA RPD Plate No.
Weight （ kg ）
RCD Cartridge No.
RAK-CN Arbor Code No. ＊ 1
L
C
Code.No
TAPE
MIN. ～ MAX.
130 ～ 180 180 ～ 230
10 ～ 30 30 ～ 80
HSK 63A-RAC130-225AA -RAC180-225AA HSK100A-RAC130-205AA
6.6 7.1 9.0
HSK63A
HSK 63A-RAK-130A
61
225 205 255 305 355 405 455 505 205 255 305 355 405 455 505 205 255 305 355 405 455 505 205 255 305 355 405 455 505
HSK100A-RAK-110A -160A -210A
-305AA -355AA -255AA
11.5 14.2 16.9 19.6 22.3 25.0 9.5 12.0 14.7 17.4 20.1 22.8 25.5 10.1 12.6 15.3 18.0 20.7 23.4 26.1 10.6 13.1 15.8 18.5 21.2 23.9 26.6 15.7 16.2 16.7 17.2 17.7
130 ～ 180
10 ～ 30
RPD-130AA
-260A -310A -360A -410A
-405AA -455AA -505AA -RAC180-205AA
-RAK-110A -160A -210A
-255AA -405AA -305AA -355AA
180 ～ 230
30 ～ 80
RPD-180AA
-260A -310A -360A -410A
-455AA -505AA -RAC230-205AA -255AA
For Heavy Duty Boring of Iron and Cast Iron RCD-130 ×2 Insert CN08
90
-RAK-110A -160A -210A
HSK100A
-305AA -355AA -455AA -405AA
230 ～ 280
80 ～ 130
-260A -310A -360A -410A
RPD-230AA
-505AA -RAC280-205AA
-RAK-110A -160A -210A
-405AA -505AA -455AA -255AA -305AA -355AA
280 ～ 330
130 ～ 180
RPD-280AA
-260A -310A -360A -410A
330 ～ 380 380 ～ 430 430 ～ 480 480 ～ 530 530 ～ 580
180 ～ 230 230 ～ 280 280 ～ 330 330 ～ 380 380 ～ 430
RPD-330AA -380AA -430AA -480AA -530AA
-RAC530-220AA -RAC330-220AA -RAC380-220AA -RAC430-220AA -RAC480-220AA
HSK100A-RAK330-125
98
220
★ The Code No. on above table are the boring arbors with RCD-130 cartridge (Insert tip: CN08 ) the Heavy Duty Boring of Iron and Cast Iron. Please refer P.106 for cutting condition. ★ Boring arbor with cartridges & insert for Steel, Stainless Steel and Cast Iron ( E ) , for Aluminum ( A ) and for Through Hole & Multi Sheets ( K ) are available. Please refer P.84 for cartridges. e.g. HSK100A-RAC130-205AA-E ★ Please refer P.84 for RAK arbor and RPD plate. ★ Arbor, plate and cartridges are delivered in separate packages. ★ Please check the interference of the arbor with your M/C not to occur the interference in the tool magazine. ★ The location of the cutting edge is same as the drive key for standard. The different location is available, please specify θ . e.g. HSK100A-RAC180-255AA (90 ゜ ) ★ Lubrication Pipe is optional. Please refer P.298 ★ When cutting the outer diameter, use the spindle in reverse rotation.
θ ( 0 °～ 180 ° )
Drive Key
Cutting Edge
View from Cutting Edge
265
Powered by FlippingBook