HSK BALANCE-CUT BAC ADVANCED BORING ARBOR for LARGE DIA.
L
Insert 6MP
ZMAC-V Unit
P.81
For Finishing
φ D
ZMAC-V Cartridge
MIN. dial readout on dia. : 0.01mm Boring Dia : φ 130 ~ φ 595mm
P.81
φC
RPC Plate
P.258
BAC-V
RAK Arbor P.258
MCC-130B (Balancer)
P.109
Boring Dia: φ 130 ~ 595mm
JAPAN PAT.
D
Weight ( kg )
PPC Plante No
Cartridge ( Balancer )
RAK Arbor Code No.
L
C
Code.No
TAPER
MIN. ~ MAX. 130 ~ 195 180 ~ 245
HSK 63A-BAC130-205V -BAC180-205V HSK100A-BAC130-185V
6.5 7.5 9.5
RPC-130 -180
HSK 63A
205 185 235 285 335 385 435 485 185 235 285 335 385 435 485 185 235 285 335 385 435 485 185 235 285 335 385 435 485
HSK 63A-RAK-130A HSK100A-RAK-110A
61
-160A -210A -260A -310A -360A -410A -RAK-110A -160A -210A -260A -310A -360A -410A -RAK-110A -160A -210A -260A -310A -360A -410A -RAK-110A
-235V -285V -335V -385V -435V -485V -BAC180-185V -235V -285V -335V -385V -435V -485V -BAC230-185V -235V -285V -335V -385V -435V -485V -BAC280-185V
12.0 14.7 17.3 20.1 22.8 25.5 10.1 12.6 15.3 18.0 20.7 23.3 26.1 10.8 13.3 16.0 18.7 21.3 24.1 26.8 11.4 13.9 16.6 19.3 22.0 24.7 27.4 18.0 18.8 19.7 20.6 21.4
130 ~ 195
RPC-130
180 ~ 245
RPC-180
90
MCCZ-130V (MCC-130B) Insert 6MP
HSK100A
230 ~ 295
RPC-230
-160A -210A -260A -310A -360A -410A
-235V -285V -335V -385V -435V -485V
280 ~ 345
RPC-280
330 ~ 395 380 ~ 445 430 ~ 495 480 ~ 545 530 ~ 595
-BAC330-210V -BAC380-210V -BAC430-210V -BAC480-210V -BAC530-210V
RPC-330 -380 -430 -480 -530
210
HSK100A-RAK330-125
98
★ “ C ” grade ( Coated ) Inserts are supplied as standard. ★ Unit “ M5HZ-55V ” is provided as standard, please refer
P.109 Please refer
P.107 for cutting condition.
θ ( 0 °~ 180 °)
P.258 for Arbor ( RAK ) and Plate ( RPC ) .
Drive Key
★ Arbor, Plate and Cartridge are delivered in separate packages. ★ When ordering, please let us know machine maker and model no. to avoid the interfererce with tool magazine of ATC . ★ The location of cutting edge is same as drive key in standard. The different location is available, please specify θ in Code No. e.g. HSK100A-BAC180-235V ( 90 ° ) ★ For centre through coolant type, please add “ -C ” at the end of Code No. e.g. HSK100A-BAC130-185V-C ★ Lubrication Pipe is optional. Please refer P.298
Cutting Edge
View from Cutting edge.
High Pressure Coolant Through Tool
263
Powered by FlippingBook