DOUBLE FACE CONTACT TOOLING SYSTEM
7/24 Taper
For BT Double Face Contact Spindle
P.154
Tooling System JAPAN.PAT
P.153
When the tool is clamped, the gentle taper of main body internally expands to create a dead lock of the taper connection, then it results in maximizing the pulling force. The ideal clamping ratio of taper : flange = 90% : 10% is achieved.
The Power of Internal Expanding Pressure System
Tooling System
P.173
MAJOR DREAM Holder
Tooling System is not the simple double face contact system of taper and flange, but the system with dampening effect and the excellent front chucking system.
TiN Bearing Nut (HV2,200)
Dampening Effect
Face Contact
2Lock (NBT)
1/10 short Taper & Polygonal Taper
NC5 Tooling System P.213
Pull Stud Power Clamp Mechanism
Spindle
Since the launch of the Nikken NC5 Tooling System at JIMTOF'94 OSAKA, the system has proven its outstanding capability is a wide cross-sector of Japanese industry, with ever-increasing expectation of its being adapted as the next generation tooling interface. Unique tool construction is built-in NC5 tooling system. The slotted taper cone which is pre-loaded by a disc spring increases its vibration dampening effect, then finally adjusting the minute gauge line error completely. Chattering Stability = Static Stiffness X Dampening Ratio Thus, the advantage of NC5 tooling system is clearly demonstrated.
Bearing
1/10 Short Taper
Face Contact
Drive Key
HSK Tooling System
P.227
HSK-A shank is the hollow shank with 1/10 taper, and taper & flange contact system. This is based on ISO 12641-1 (DIN69893-1) . It's not well balanced due to the unsymmetrical shape, but Nikken HSK-A shank has a hole and a flat for mass balancing as standard. HSK-E & HSK-F shank are the shank without drive key slot and U groove. This is based on DIN69893-5, 6. This is used for high speed application. HSK40A, 50A, 63A, 100A HSK25E, 32E, 40E, 50E, 63E are available. HSK63F
Polygonal Taper C6 Tooling C6 tooling system is used for the tooling of the integrated machine.
Please refer NIKKEN NC TOOLING SYSTEM for MULTI-TASKING MACHINE Catalogue
22
Powered by FlippingBook