UNIVERSAL MICRO STAND
Long Reach 300mm
Free flexing with single knob, no dead angle and long reach, two arms incorporating ball joint mechanism at both ends provide free movement in any direction such as vertical,
lateral, longitudinal or rotational etc. If stretched horizontally, a reach
as long as 300mm can be attained. Measurements of inside dia., outside dia., end face and back face etc, can be made at will.
UDS-1
OFF
ON
New mechanism permitting no looseness due to vibration
By only tightening the single red clamp knob, all articulated joints are locked firmly and no fine (micron) movement will occur even after being left as they are for 100 hours.
Clamp Mechanism
Clamp Rod Needle Roller
Clamp Knob
Wedge Plate
UDS-2
Remote Fine Adjusting Knob (UDS-2) The base is made by heavy and precision casting and arms are clamped by a remote knob with fine adjustment. Measurement position of dial gauge can be easily adjusted without losing setup of Universal Micro Stand.
Strong magnet base makes it possible to adapt to vertical, angular, uneven surface, etc.
Remote Adjusting Knob
UDS-1 UDS-2 Code No.
Style With magnet base With precision casting base
★ Dial gauge is supplied as an option.
Any dial gauge, pick tester can be connected with this attachment.
On M/C
Attachment for φ 6 mm Hole ( UDS- 93)
Slight Adjusting Knob ( UDS- 92)
Indicator Fixing ( UDS- 94-N) φ 8 mm Hole
Indicator Fixing Body ( UDS- 91)
Concave Groove
On NC Lathe
On Grinding Machine
144
Powered by FlippingBook