UNIVERSAL MICRO TOUCH
3D Electronic Edge Detector of Basic Point Precision Touch Sensor Repeatability ± 2 micron. Long Safety Over-Travel Distance protects from damage. X , Y= ± 7mm Z= 3mm Red lamp and electronic beep sound notice the touching position. When touching to the work piece, red lamp immediately lights up all around. The one with BT shank gives the electronic beep sound also to make double notices. How to obtain touching position Make the stylus slowly get near to the measuring surface of work piece and the red lamp will light at the moment when the former touches the latter. A position where 3mm is compensated from that position (because of 6mm stylus diameter ), is the touching position to be obtained.
Measurement of height
Measurement and alignment of inside diameter
Measurement of groove width
Measurement of diameter
Setting reference position
Battery(quintuple cell type 1.5V : 2pcs.)
Straight Shank UMT MICRO TOUCH
φ 31
φ d
φ 6 ± 0.005
6
ℓ
ℓ 1
43
ℓ 1 61 65 75
ℓ 68 65 66.5
φ d 20 32 MT 2
Code No. S20-UMT S32-UMT MT2-UMT
Weight (kg) 0.4 0.7 0.4
UMT
★ Ball type φ 6mm stylus is also available : S32-UMTB
200 (150) ± 0.1
BT-UMT-W MICRO TOUCH
Battery (9V6F22 1pc.)(LR44 × 2pcs : BT30-UMT150)
Electronic Beep
LED
3
φ6 ± 0.005
φ62.5 (45)
φ44.5 (31)
7
35
Dimensious in parentheses are same as BT30-UMT150
Weight (kg)
TAPER No.30 No.40 No.50
Code No. BT 30 -UMT 200 W
2.1 1.0 2.7 5.0
-UMT 150
BT 40 -UMT 200 W BT 50 -UMT 200 W
★ Ball type φ 6mm stylus is also available : BT40-UMTB200 ★ IT40-UMT200W and IT50-UMT200W are also available.
For Machining Centre with ring sensor, the electric circuits are different from standard, please purchase this through M/C Builder. BT-UMTH MICRO TOUCH for ring sensor
BT30-UMT
141
Powered by FlippingBook