When the machine has been used for 2 ～ 3 years, the run-out accuracy of the spindle will be declining with accuracy of 0.01mm ～ 0.04mm at 100mm from the gauge line, the Zero Fit Holder allows correction of this error back to the run-out of 0.001 ～ 0.002mm. ZERO FIT TYPE OIL HOLE HOLDER
ZERO FIT TYPE OIL HOLE HOLDER SLIM CHUCK
G No. ( Option ) L
MAX. run-out at 100mm
SZFO 10 SZFO 16 SZFO 25
0.050mm/dia. 0.040mm/dia. 0.025mm/dia.
φ D 2
ɸ D 1
φ D
SZFO
Fig.1
ZERO FIT TYPE OIL HOLE HOLDER MILLING CHUCK
L
MAX. run-out at 100mm
φ D 2
CZFO 20 CZFO 32
0.050mm/dia. 0.030mm/dia.
φ D 1
φ D
Fig.2
CZFO
The milling surface finish and quality can be improved. ■ The milling surface finish and quality can be improved. ■ For better and stable finish tolerance for machining holes. ■ The tool life can be extended.
■ Zero Fit Holder has wide adjustment range compared with competitors equivalent, and its mechanism performs simple, quick and secured operation. ■ The choice of the Slim Chuck style “SZF” & the Anniversary type Milling Chuck style “CZF” can be selected depending on your cutter. ■ The side through coolant type does not hurt the machine tool spindle inside.
MAX. Coolant Pressure : 2.5MPa
ℓ
SKG10-10HG SKG10-10HG SKG16-12HG SKG25-16HG － － G No. ( Option )
TAPER
MAX.r/min Weight(kg)
SK10 Collet
Fig. 1 2
Code No. L
D
D 1 49 66.5
D 2 82 98
6 ～ 10 20 6 ～ 10
BT40-SZFO10-160
69.5 65 70 80
4.0 4.5 8.0 9.0 9.0 9.0 12.0
No.40
3,000
-CZFO20-180 ( 65 )
SK10 SK16 SK25 KM20 CCK20 KM20 CCK20 KM32 CCK32
BT50-SZFO10-180 -SZFO16-190 -SZFO25-175 -CZFO20-175 -CZFO32-190
49 64
2.75 ～ 16 16 ～ 25.4
1
98
3,000
No.50
66.5 80.5
65 80
20 32
2
118
★ For SZFO Slim Chuck, Nut is available as a standard. ★ For SZFO Slim Chuck, Adjust screw (G No.), wrench to adjust run-out ( 9ZFL ) and SKL spanner are available as an option. SZF6: SKL-6W, SZF10: SKL-10, SZF16: 9HC16, SZF25: 9HC25 ★ For SZFO Slim Chuck, Collet is available as an option. .Please refer P.283 for Slim Chuck Collet. ★ For SZFO Slim Chuck, Adjust screw for small cutter shank dia. ( φ 4 ) is available. Please contact with us. ★ Stopper block is available as an option. When ordering, please inform your M/C maker and Model as well as your M/C spindle flange dimension. P.324
122
Powered by FlippingBook